Month: November 2022

The Mediant 4000 is a fantastic all-in-one multimedia player that comes with a built-in FM radio. It’s also compatible with many other devices, such as smartphones and tablets.

However, you may find it impossible to get the Mediant working after a few years of use. The reason for this can be hardware issues or software glitches.

In this article we will show how to reset your AudioCodes Mediant 4000B so that it works again. First, let us explain what an audio code is…

What is an audio code?

An audio code is a short sequence of data that represents one song in one of two formats – MP3 or WMA. The AudioCodes Mediant 4000 only has enough space on its memory card to store a maximum of four audio codes at any time.

If you want to listen to more than four songs, you’ll need to upgrade your Mediant 4000 using external media cards.

For example, if you have a 128MB SD card, then you could store up to 16 songs (4×4 MB) on to it. If you want to store 24 songs (6×6 MB), you would need to buy an SD card with 256MB capacity. And if you wanted to store 32 songs (8×8 MB) then you would need a 512MB card.

It’s important to note here that most of the large SD cards available today are actually 4GB cards, which means they only hold the equivalent of 64 songs. This isn’t surprising when you consider the size of an audio code!

To avoid confusion, it should be noted that there is no limit on the number of songs you can store on your Mediant 4000 via audio codes. However, some users have reported problems storing more than 40 songs on their mediant 4000.

With these limitations in mind, it’s clear that you should only buy an SD card that has a minimum storage capacity of 1GB or greater.

When you connect your Mediant 4000 to your PC, it will automatically create a folder called ‘audio codes’ on your hard drive.

This folder contains every audio code that was stored on your Mediant 4000’s internal flash memory. To remove all audio codes from your Mediant 4000, follow these steps:

  • Connect your Mediant 4000 to your computer using the supplied USB cable.
  • Open the ‘audio codes’ folder using Windows Explorer.
  • Right click inside the ‘audio codes’ folder and select Delete Folder.
  • Now, open the Mediant 4000 settings menu and select Reset to Factory Defaults.
  • You will see a warning message saying that certain files on your Mediant 4000 might not work once it has been reset. Click OK to proceed anyway. Your Mediant 4000 will restart itself immediately.
  • Your Mediant 4000 will now display the “Initializing Firmware” screen, followed by the Mediant 4000 startup logo.

Once you hear the startup sound, press the power button on the front of your Mediant 4000 to turn it off and then on again to start up. If you hear a buzzing noise instead, try holding down the power/reset button on the back of the device until the startup sound fades away.

Finally, you can disconnect your Mediant 4000 from your PC and continue listening to your music. You may need to reconnect your Mediant 4000 to your PC before your music starts playing again.

Note: We haven’t tested whether the Mediant 4000 supports the playback of video files through audio codes. So far, we don’t think it does, but we advise you check our video recommendations page before buying your first Mediant 4000.

Have you experienced any problems with your AudioCodes Mediant 4000? Do you use it to listen to music while travelling? Let us know about your experiences in the comments section below.

If you want to learn more about AudioCodes Mediant 4000, check out our dedicated page.

You’ve probably heard the term “building envelope.” It refers to the exterior walls, roof, and windows of your home. The building envelope is often the first thing you see when you walk through your front door. But it can be hard to know what exactly it takes to make sure that this important area Bukit Batok West Avenue 8 EC is well-built.

1. Measure Twice, Cut Once

The best way to ensure your new condo building envelope project goes smoothly is to get started early. That means measuring twice and cut once. You should have an experienced contractor or engineer measure the entire exterior of your property to determine where your windows and doors are located, how tall they are, and how wide they are. This will help give you an idea of how much space you’ll need for the new additions to your home.

Once you have your measurements, you can start thinking about how you want things to look. For example, if you decide on vinyl siding, you’ll want to make sure there’s enough room between the siding and the window frame so that you don’t end up with any gaps or unsightly seams.

Then, after you have all of your measurements in hand, it’s time to order your materials. If you’re using vinyl siding, you may find that some companies offer custom sizes and cuts – which could save you money upfront.

2. Build a Plan B

If you aren’t happy with the measurements provided by your builder, you can always go back to them and ask if they might be open to changing the size of your windows or adding more insulation to your walls. However, if you’re going to build everything yourself, you can do just that!

By building your own windows and doors, you can ensure that they fit perfectly into your condo unit – and even add a few extra square feet for you to move around in. Of course, you’ll also need to hire contractors for these projects, but you won’t have to pay for the extras out of pocket.

3. Insulate Your Walls Properly

Insulation is an essential part of making sure your building envelope project goes as planned. It helps keep heat inside your home during winter months and cool air outside during summer months. Most people would say that insulation doesn’t come cheap. In fact, you can expect to spend anywhere from $100 to $500 per linear foot on insulation for your walls alone.

But there are ways to reduce the cost of insulating your walls without sacrificing quality. One simple solution is to use spray foam insulation. Instead of blowing insulation into your walls one piece at a time, spray foam has the ability to fill large areas quickly and easily. As a result, you can save both time and money on this project by working with a professional who knows how to apply spray foam properly.

In addition, you can save money by purchasing pre-made, ready-to-install insulation panels instead of buying sheets of fiberglass or cellulose and cutting them to fit your walls. Many companies offer these panels already installed in the wall cavity, allowing you to save on installation costs as well.

4. Make Sure Your Roof Is Waterproof

Your building envelope isn’t only about keeping heat in during the coldest months and letting cool air out during the warmest ones. It also needs to allow water to drain away from the building. If you live in a region that experiences a lot of rain, then your building envelope must be able to withstand water pressure. Otherwise, you risk flooding your home, not to mention causing other issues like mold growth.

One easy way to test whether your building envelope can handle rainfall is to simply pour a bucket full of water over the top of it. If it drains down easily, then you know your building envelope is waterproof. But if it holds onto the water, that means your building envelope isn’t up to snuff.

5. Choose Quality Materials

There are many different kinds of building materials available. Some are very sturdy and can last for years, while others are made from lightweight materials that wear out quicker than you think. Before you purchase anything, try to choose a material that is durable and long lasting, so that you can avoid having to replace it later on.

Another good way to save money on materials is to buy from local businesses. Local builders tend to focus on building materials that work well together, rather than choosing the lowest price. So, if you want to save money on your next building envelope project, look for a company that offers a variety of products in all price ranges.

6. Use Caulk

Caulking is another important component of your building envelope project, especially if you’re planning to install new windows in your home. You can use caulking to seal gaps between your windows and the building, as well as between the windows themselves. Doing so prevents water from seeping into your home and allows air to flow freely through your home.

When caulking, you’ll want to use a high-quality product that lasts longer. And if you plan to change out your windows, you’ll want to make sure that they fit tightly against your frames before you caulk them in place.

7. Install Windows Correctly

Windows play a huge role in your home’s overall energy efficiency. They let in light and fresh air while blocking out unwanted heat and moisture. Unfortunately, installing your home’s windows incorrectly can compromise their function.

That being said, you should never underestimate the importance of taking care of your windows. If you install them improperly, your windows could leak, leading to moisture damage inside your home. To avoid this problem, make sure to follow these tips:

Ensure that your windows are level and properly fitted. A level surface makes installation easier and less likely to cause problems.

Make sure that your windows are correctly adjusted and aligned to maximize airflow.

Use weatherstripping and gaskets to prevent leaks.

With proper preparation, you can ensure that your building envelope project goes off without a hitch. Just remember to check in regularly with your contractor or engineer to see how things are progressing.